| Name | Technology | Category | Quantity | Specifications | Action | |
|---|---|---|---|---|---|---|
|
90 Degree Elbow 3/4 in Tube 1 1/16-12 SAE MS Straight Swivel Ready To Ship |
LM2500 & LM6000 | Consumables and Spares | 38 |
Type: Elbow, Angle: 90 Degrees, Tube Size: 3/4 in, Thread Size: 1 1/16-12 SAE MS, End Type: Straight Swivel, Material: Industrial Grade |
||
|
Filter Cartridge Ready To Ship |
LM2500 & LM6000 | Consumables and Spares | 10 |
Type: Filter Cartridge, Application: Replacement, CompatiblePart: 120-4781P0001, ImexPartNumber: 72500748 |
||
|
2 1/2-inch NPT Cable Gland Ready To Ship |
LM2500 & LM6000 | Consumables and Spares | 24 |
Type: Cable Gland, Size: 63, EntryThreads: 2 1/2-inch NPT, Material: Brass, TemperatureRange: -60°C to 130°C |
||
|
1.0M Extension Cable Ready To Ship |
LM2500 & LM6000 | Consumables and Spares | 23 |
CABLE: EXTENSION, SPECIFICATION: 2 X AWG 16 WITH 2 CONNECTORS, LENGTH: 1.0M, VOLTAGE: DC 24V, CONNECTORS: BLUE, COLOR: WHITE, APPLICATION: USED FOR DAISY CHAIN CONNECTION |
||
|
Welded Stud Ready To Ship |
LM2500 & LM6000 | Consumables and Spares | 33 |
type: Stud, design: Full Threaded, size mm: 6, 100, material: CS Class 8.8, coating: Zn/Al |
||
|
1250 KCMIL Flex Connector Ready To Ship |
LM2500 & LM6000 | Consumables and Spares | 8 |
Type: Connector, Design: Flex, Rating: 1250 KCMIL, Length: 1ft 8in, Phase: B |
||
|
PCB Terminal Block Assembly Ready To Ship |
LM2500 & LM6000 | Consumables and Spares | 27 |
ASSEMBLY: PCB TERMINAL BLOCK, RESISTORS: WITH 2K AND 1.8K, VOLTAGE: 30V MAX |
||
|
Hydraulic Start Return Hose Ready To Ship |
LM2500 & LM6000 | Consumables and Spares | 3 |
type: Hose Assembly, system: Hydraulic Start, application: Return, compatibility: PC-PG-PH LH |
||
|
Flex Connector for Neutral Cubicles Ready To Ship |
LM2500 & LM6000 | Consumables and Spares | 16 |
Type: Connector, Design: Flex, Size: 1250 KCMIL, Length: 1ft 8 1/4 inches, Application: Lineside Cubicle, Neutral Cubicle |
||
|
M 27 Stud Ready To Ship |
LM2500 & LM6000 | Consumables and Spares | 124 |
Type: Stud, Size: M27, Length: 140mm, Standard: EN 10269, Material: X5CrNi18-10+C700 |
||
|
Gland Type Entry Seal Kit Ready To Ship |
LM2500 & LM6000 | Consumables and Spares | 33 |
SEAL: ENTRY KIT, GLAND: TYPE FOR 4 CABLES/PIPES ROXTEC RG M63/4 |
||
|
Anti-Static Filter Element Ready To Ship |
TM2500 | Consumables and Spares | 20 |
type: filter element, feature: anti-static, micron rating: 6, compatible with: TLO duplex filter |
||
|
Lineside Cubicle Cable Entry Bus Bar Support Ready To Ship |
LM2500 & LM6000 | Consumables and Spares | 8 |
Type: Fabrication, Component: Cable Entry Bus Bar Support, Application: Lineside Cubicle |
||
|
3/4" Relief Valve Ready To Ship |
LM2500 & LM6000 | Consumables and Spares | 4 |
inlet size: 3/4 inch MNPT, outlet size: 1 inch FNPT, material: Carbon Steel, Stainless Steel, seal material: Viton, pressure: 150 PSIG, compliance: ASME Section VIII |
||
|
CDP Purge Support Ready To Ship |
LM2500 & LM6000 | Consumables and Spares | 6 |
Type: Fabrication, Component: CDP Purge Support, Applications: Industrial Purge Systems |
||
|
Hex Cap Screw Ready To Ship |
LM2500 & LM6000 | Consumables and Spares | 24 |
Size: Hex Cap |
||
|
Superbolt Nut Ready To Ship |
LM2500 & LM6000 | Consumables and Spares | 12 |
Type: Nut, Design: Superbolt, Size: 2 1/2 inches, Application: Generator Base |
||
|
M20 Stud Ready To Ship |
LM2500 & LM6000 | Consumables and Spares | 101 |
Type: Stud, Size: M20, Length: 120mm, Standard: EN 10269, Material: X5CrNi18-10+C700 |
||
|
1-1/2 Inch Ball Valve Ready To Ship |
LM2500 & LM6000 | Consumables and Spares | 20 |
Type: Valve, Design: Ball, Size: 1-1/2 inches, PressureRating: 150 LB, Connection: Flanged Raised Face, Material: SS, 316SS, 316SS, Features: Reduced Port, Reinforced TFE Seats, Lockable Handle |
||
|
LP Jacking Oil Hose Ready To Ship |
LM2500 & LM6000 | Consumables and Spares | 4 |
application: LP Jacking Oil Pump Inlet, material: High Pressure Hose, temperature range: Varies |